2025 Kubota Wheel Loaders R430

Information

2025 Kubota Wheel Loaders R430

Compact design with impressive power allows the R430 to get the work done where larger loaders can't fit. The R430 also delivers big on comfort in every season with an available enclosed cab featuring heat and A/C.

Features may include:

Powerful Kubota Engine

The R430 boasts a gross rating of 47.6 HP (SAE J 1995) that provides the extra muscle needed for all of the chores that the loader is capable of performing.

Comfortable Work Station

Comfort and convenience are the keys to operator efficiency. The working station is mounted on rubber ISO mounts to minimize sounds and vibrations. Increase your comfort level in all seasons with an enclosed heated and A/C cooled cab.

Load Sensing Transmission

As the travel and loading conditions change, the R430's transmission automatically shifts to compensate to provide maximum torque and speed for efficient ground speed operation. The manual switch can be operated with a convenient button located on the loader control level.

Limited Slip Differential

Mud, sand, snow are no problem for the R430's front limited slip axle. If a front wheel slips, the power is transferred to the opposite wheel to restore traction.

Hybrid Link Design

The well-balanced cylinder position of the Z link provides strong bucket break out forces and a lift path almost parallel to the ground for superior reach and lift.

Photos

Highlights

  • Wichita, Kansas
  • 2025
  • Kubota
  • Wheel Loaders R430
  • D1830-CR-TIE4-WL5
  • Hydrostatic transmission
  • Available
  • Hinge Pin Height: 9ft2in | Dump Height at Fully Raised Position: 7ft2in ft

Specifications

  • 2025
  • Kubota
  • Wheel Loaders
  • R430
  • Compact
  • D1830-CR-TIE4-WL5
  • Tier 4
  • Output (SAE J1995 gross) 47.6 (35.5) / 2600 HP/(kW)/rpm | Output (SAE J1349 net) 44.5 (33.2) / 2600 HP/(kW)/rpm
  • 11 cu in (cm3)
  • Hydrostatic transmission
  • 12.5/70-16-8PR
  • Traveling Speed: High: 12.4 (20.0) mph (kph) | Traveling Speed: Low 3.0 (4.8) mph (kph)
  • Bucket Breakout Force: 5215 (23.2) lbs (kN) | Rated Operating Capacity, (ROC) 2298/2474/504/1625 | Bucket Breakout Force: 4839 (2195) lbf (kgf) | Lift Arm Breakout Force: 3858 (1750) lbf (kgf) | Traction Force 5485 (24.4) lbs (kg) | Loader Raise / Lower Time: 4.4 / 3.3 sec
  • Auxiliary Hydraulics Flow Rate: 11.1 (42.1) GPM (LPM) | Auxiliary Hydraulic Pressure psi 2697 (18.6) kgf (cm2)
  • Loader Hydraulic Pressure psi: 3271 (230) kgf (cm2)
  • Enclosed wet disc
  • Articulation Angle (deg.): 40 (each direction) | Angle of Rear Frame Oscillation (deg.): ±8 | Loader Clearance Circle, 12' 1" (3695) ft (mm) | Maximum Dump Angle: 44 degrees | Reach Fully Raised at Maximum Dump Angle: 2ft9in ft | Steering Angle: 40 degrees | Frame Oscillation Angle: 8 degree
  • 14' 4" (4355) in. (mm)
  • 8' 3" (2515) in. (mm)
  • 4' 12" (1520) in. (mm)
  • 11" (280) in. (mm)
  • Turning Radius Track Circle: 10' 1" (3085) ft (mm)
  • Hinge Pin Height: 9ft2in | Dump Height at Fully Raised Position: 7ft2in ft
  • Tank: 15.3 (58) gal (l) | Reservoir: 11.1 (42) gal (l)
  • Tipping Load - Straight: 5335 (2420)/5743 (2605) / 3494 (1585)/3770 (1710) lbs (kg) | Tipping Load- Full Turn: 4596 (2085)/4949 (2245) / 3009 (1365)/3251 (1475) lbs (kg) | Lifting Capacity at Ground Level: 3687 (16.4) lbs (kN)
  • Tank: 14.3 (54) gal (l)
  • Standard Bucket Capacity: 0.5 yd3
  • 7758 (3519) / 8232 (3734) lbs (kg)
  • Front/Rear Axle Traction Lock: Limited slip differential